Computer Networking @Ecole Polytechnique
A derivative of AODV, denoted LOADng, is proposed for use in very constrained environment, sacrificing a number of features from AODV for the benefit of smaller control messages and simpler processing logic. Among these sacrifices is intermediate route replies. This…
Read more
This paper studies the routing protocol “Lightweight On-demand Ad hoc Distance-vector Routing Protocol – Next Generation (LOADng)”, designed to enable efficient, scalable and secure routing in low power and lossy networks. As a reactive protocol, it does not maintain a…
Read more
Data delivery across a multi-hop low-power and lossy networks (LLNs) is a challenging task: devices participating in such a network have strictly limited computational power and storage, and the communication channels are of low capacity, time-varying and with high loss…
Read more
This paper introduces extensions and applications of depth-first forwarding (DFF)-a data forwarding mechanism for use in unreliable networks such as sensor networks and Mobile Ad hoc NETworks with limited computational power and storage, low-capacity channels, device mobility, etc. Routing protocols…
Read more
LOADng is an on-demand routing protocol, derived from AODV, simplified for use in lossy, low-power and constrained environments, where the ability for devices to communicate is a commodity to their primary function, and where therefore not only the communications channel…
Read more
Jitter is a small, random variation of timing before message emission that is widely used in non-synchronized wireless communication. It is employed to avoid collisions caused by simultaneous transmissions by adjacent nodes over the same channel. In reactive (on-demand) routing…
Read more
Jittering (a small, random variation in timing of control message emission) is widely used in protocols for wireless communication, in order to avoid simultaneous packet transmis- sions over the same channel by adjacent nodes in the network. Used for both…
Read more
This paper analyses the impact of jitter when applied to route discovery in reactive (on-demand) routing protocols. In multi-hop non-synchronized wireless networks, jitter—a small, random variation in the timing of message emission—is commonly employed, as a means to avoid collisions…
Read more
Many protocols for Mobile Ad-hoc Networks propose construction of routes reactively using flooding. The advantage hereof is that no prior assumption of the network topology is required in order to provide routing between any pair of nodes in the network….
Read more
This paper proposes an extension to reactive routing protocol, for efficient construction of a collection tree for data acquisition in sensor networks. The Lightweight On-Demand Ad hoc Distance Vector Routing Protocol-Next Generation (LOADng) is a reactive distance vector protocol which…
Read more
This paper proposes an extension to the “LLN On-demand Ad hoc Distance-vector Routing Protocol – Next Generation” (LOADng), for efficient construction of a collection tree for data acquisition in sensor networks. The extension uses the mechanisms from LOADng, imposes minimal…
Read more
Routing protocol is a critical component of Low-power and Lossy Networks for Smart Grid. The protocols are used for data forwarding, which includes data acquisition, information dissemination, etc. This paper evaluates two main routing protocols used for Low-power and Lossy…
Read more
My colleagues Jiazi, Juan, and I, just finished the final editorial bits of process on a new paper “Use ’em or Lose ’em: On Unidirectional Links in Reactive Routing Protocols”, published in Elsevier Ad Hoc Networks – and with the paper…
Read more
Introduction The Lightweight On-demand Ad hoc Distance-vector Routing Protocol –Â Next Generation (LOADng) is a routing protocol, derived from AODVÂ and extended for use in Mobile Ad hoc NETworks (MANETs) and Low-power and Lossy Networks (LLNs). The LOADng control messages are carried…
Read more